Mini LED Dimmer Kit Indoor Lighting 12V 24V 1CH Monochrome LED Dimming Controller 2.4G Remote Control(V1 Only)

Outlet & Switch CombosMini LED Dimmer KitSingle color LED controllerModel: V11 channel/stepless dimming/remote control/automatic transmission/synchronization/push dimming/multiple protectionfeature4096 levels of 0-100% dimming, smooth and gray-free.Paired with 2.4G single-zone or multi-zone dimming remote control.Up to 10 remote controls can be connected to one controller.Automatic transmission function: The controller automatically transmits signals to another controller with a control distance of 30m.Synchronize across multiple controllers.Connect an external push button switch to achieve on/off and 0-100% dimming functions.The light on/off fade time is optional for 3 seconds.Overheating/overload/short circuit protection, automatic recovery.Monochrome 2.4G remote controlModel: RK4-1featureSuitable for single color LED controller.Each remote can be paired with one or more receivers.CR2032 battery powered.With LED indicator light during operation.There are magnets on the back that can be stuck on the back frame1 Channel Single Color LED Dimming Controller KitSuitable for 5-36V monochromatic lamp (WW.NW.CW) indoor dimming lighting decorationHow to match V1 with RK4-1?Use V1's Match keymatch:Short press the matching button (V1) and immediately press the on/off button (RK4-1)The V1 LED indicator flashes quickly several times to indicate a successful match.delete:Press and hold the match key (V1) for 5 seconds to delete all matches,The V1 LED indicator flashes quickly several times to indicate that all matching remote controls have been deletedV1 also has Push Dim functionThe provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches.Short press: turn the light on or off.Long press (1-6 seconds): Press and hold for stepless dimming. Every time you press and hold, the light brightness will change in the opposite direction.Dimming memory: When turned off and on again, the lights will return to the previous dimming level even if the power is lost.Synchronization: If multiple controllers are connected to the same button switch and long pressed for more than 10 seconds, the system will be synchronized and all lights in the group will be dimmed to 100%.This means no additional synchronization wires are required in larger installations.We recommend that the number of controllers connected to push button switches should not exceed 25,The maximum length of wire from push to controller should not exceed 20 meters.Installation precautions (V1)1. Products must not be stacked with a distance of 20cm to avoid poor heat dissipation affecting product life.2. The product must not be installed close to the switching power supply, with a distance of 20cm to avoid radiation interference from the switching power supply.3. The installation height is 1m from the ground to avoid shortening the remote control distance due to too weak received signals.4. The product is not allowed to be close to or covered by metal objects. The distance is 20cm to avoid signal attenuation and shorten the remote control distance.5. Avoid installing at the corners of walls or beams, with an interval of 20cm to avoid signal interference.Safety information (RK4-1)1. Please read all instructions carefully before starting installation.2. When installing the battery, pay attention to the positive and negative polarity of the battery. If the remote control is not used for a long time, please remove the battery. When the remote control distance becomes smaller and becomes insensitive, please replace the battery.3. If the receiver does not respond, please pair the remote control again.4. Handle the remote control gently to avoid falling.5. For indoor and dry location use only.6. If the LED indicator light does not light up when you press the button, it may be that the battery is out of power or the contact is poor due to repeated plugging and unplugging. Please replace the battery, or use a screwdriver to pry up the battery shrapnel.Features: Mini styleModel: V1-RK4-1 KitCertification: CE, ROHSMaterial: ABSmaximum. Load power: 288WOrigin: Mainland ChinaProduct Type: DimmerInput voltage: 5-36VDCInput current: 8.5AOutput current: 1CH, 8AOutput type: constant voltageInput signal: 2.4GHz + Push DimDimming range: 0 -100%Dimming gray scale: 4096 (2^12) levelsDimming curve: logarithmic

• Outlet & Switch Combos