1pc Stainless Steel Single Sided Wet Film Applicator - Precision Coating Tool for Uniform Paint and Adhesive Application(1mm)

Operation steps:Make sure the paint is well mixed by shaking and stirring Mark product name, lot number, type of coating device and any other information that will help to identify it in the future on test CARDS or other suitable coating substrate. Make sure the test card is fixed on the coating pad. If vacuum chuck is used, make sure that all vacuum holes on the vacuum plate are covered by the cardboard to ensure that there is enough vacuum to fix the test cardboard. Place the film applicator above the card and under the label. Finally, place a paper towel larger than the size of the paper card under the paper card, so as to absorb the excess paint spilling over the bottom of the paper card during the coating process. Place the coated substrate on a smooth, flat piece of paper (vacuum sucker is preferred) Put the film applicator on the substrate according to the clearance depth requirements Pour on the paint before the gap in the direction pulled back by the film applicator Pull back with a uniform velocity (about 25mm/ s) Immediately put the film applicator into a diluted cleaning solvent to wash with a brush, and then dry with a clean soft cloth for preservation.

• Stainless steel construction ensures durability and resistance to wear, making it ideal for repeated use in various applications.
• devised for uniform application of paints, adhesives, and similar products on flat surfaces, achieving a consistent wet film thickness.
• Effective coating width of 95mm and total length of 125mm, suitable for a variety of water-based, acidic, and alkaline products.
• Easy-to-use devise with clear operational steps, ensuring accurate application and minimal mess during the coating process.
• Ideal for laboratory and industrial use, this applicator helps streamline the coating process and improve product consistency.